Turn on the device
Slide the Power Switch (❶) up. The device shows the battery level for 2 seconds and vibrates once.
Slide the Power Switch (❶) down. The three pixels turn off one by one.
Notice: Check the position of the Recording Switch (❹) before turning the device on. If the recording switch is already up, the device starts in the recording state and does not try to connect to your phone.
The device cannot be turned on with the button. If the battery is empty, sliding the power switch up does not turn the device on.
Download the Soulog App
Scan the QR code to download the Soulog App, or search “Soulog” in the App Store or Google Play.
After installing the app, enable the required permissions:
- iOS: Settings → Soulog → turn on Bluetooth access.
- Android: Settings → Apps → Soulog → enable Bluetooth and Location permissions. On Android versions before 12, Location must be enabled for Bluetooth scanning.
Sign in
Open the Soulog App and create an account, or sign in with an existing account.
Pair and activate
Slide the Power Switch (❶) up to turn on the device. Make sure the Recording Switch (❹) is down.
In the Soulog App, choose Add Device.
Keep the device close to your phone until setup is complete.
While the device is connecting, the three pixels light up in turn. When the connection succeeds, the three pixels stay on for 2 seconds. If the device cannot connect, the three pixels flash once slowly and then turn off.
If the app cannot find your device, check that it has enough battery, that Bluetooth is enabled on your phone, and that the recording switch is down.
